| 500 Class Open Cuts and Nitrous |
 |
 |
|
1. Any frame or body design allowed.
2. Any suspension allowed subject to design and workmanship.
3. Nitrous allowed, alcohol allowed.
4. Any engine, any modification.
5. D.O.T. CUT tires (must use a minimum of two Vara Track Tires for steering purposes.)
6. All alcohol injected or nitrous vehicles must have a flame out system covering cockpit and engine
compartments readily useable (5 lb. minimum).
7. Nitrous systems must have on/off switch clearly marked as such. (Nitrous Arm)
8. MUST HAVE FULL ROLL CAGE.
9. Drive shaft loops are a must.
10. Single layer fire suit MUST be worn. Fire boots and gloves must be worn.
11. D.O.T. approved helmet.
12. Four point harness required.
13. Gas pedals must be foot type with a return loop. Double return springs on cable operated pedals.
14. Must have positvie on/off switch that will completely disconnect vehicles ignition charge system readily
accessable to driver.
15. Must have on/off switch marked in red clearly marked KILL on rear externally mounted which is capable of
completely shutting down vehicle.
16. Brakes must have ability to lock up all four wheels. Drive line brakes are allowed.
17. Steering systems must be safe in both design and workmanship.
18. Entry fee for this class is $50. Guaranteed purse. Must hold valid membership.
|
|
| Last Updated ( Wednesday, 04 March 2009 01:55 ) |